Guide · estimates
Solar performance estimates: how to read them
The performance estimate is the part of a quote that tells you what the system is for. It's also the part most often stretched. Reading it well means separating what the system will generate from what that might be worth, and checking the assumptions behind both.
Checked at source on 3 November 2026 · Published by SEO-DONS LTD
The rules
What installers must give you
The MCS Customer Commitment says installers must provide realistic estimates of how your system is likely to perform before you enter a contract, and make sure they're truthful, accurate and complete. It also says they must make you aware that you shouldn't sign a contract based on specific energy prices, because tariffs vary between suppliers and change over time.
RECC says its members follow strict rules for calculating performance estimates, and advises consumers to make sure they're told, in writing, how much energy they'll generate, the running costs and the savings, and to see how the figures were calculated and what was assumed about the property and its energy use.
The layers
Three numbers, from firm to soft
Generation. How many kilowatt-hours a year the system is expected to produce. It depends on the size, the roof's direction and pitch, shading and location. This is the firmest of the three.
Self-use. How much of that you'll use as it's generated. It depends on when you're at home and what you run in the day, and a battery can raise it. It's softer: an assumption about your habits.
Value. What the self-use saves at your electricity price, plus what exports earn under the SEG at a supplier's rate. This is the softest, because both prices change.
A trustworthy estimate keeps these separate so you can see which part rests on which assumption.
Checking it
What to check on each estimate
| Assumption | Check |
|---|---|
| Your electricity use | Does it match your bills or smart meter data? |
| Self-use share | Is it realistic for when you're at home? Is a battery assumed? |
| Shading | Does it reflect what the surveyor saw? |
| Electricity price | Which price, and is it your current tariff? |
| Export rate | Which supplier's rate, and is it a fixed or variable tariff? |
| Price changes | Does it assume prices rise each year? By how much? |
| Export limit | If a G99 approval limits exports, is that reflected? |
Exports
Export payments in the estimate
Under the SEG, licensed suppliers above a size threshold must offer a tariff for exported electricity at a rate above zero, if the installation is MCS certified and exports are metered. Rates vary widely between suppliers and tariffs, and change. An estimate that uses one supplier's rate should say which, and whether it's fixed. Because the price you pay for electricity is usually higher than export rates, the self-use share usually does more for the value than exports do.
Warning signs
Estimates that should worry you
- A single savings figure with no generation figure behind it.
- "Up to" savings with no assumptions shown.
- Prices assumed to rise sharply every year, compounding the savings.
- A self-use share that assumes you're home all day when you aren't.
- One quote promising far more generation than the others for a similar system on the same roof.
The Advertising Standards Authority has upheld complaints about home energy savings claims whose basis wasn't disclosed. If a figure can't be explained, don't rely on it.
The right question
Not "how much will I save?" but "what am I buying?"
An estimate's honest job is to describe the system: how much electricity it should produce in a typical year, and roughly how much of that your household will use. The money follows from that, at whatever prices apply over the system's life. If the generation is realistic and the system suits your use, the value takes care of itself; if it doesn't, no tariff assumption will rescue it. See comparing quotes.
Self-use
The assumption that matters most
Of all the assumptions in an estimate, the share of generation you'll use yourself usually moves the value most, because a unit you use is worth your electricity price while a unit you export is worth the export rate. Yet it's the one most often guessed. A household out at work all day uses far less of its daytime generation than one with someone at home, a dishwasher on a timer and an electric car charging at lunchtime.
Ask how the self-use share was chosen, and whether it reflects your actual pattern. If you have a smart meter, half-hourly data can show when you use electricity; share it with the installer.
Be wary of an estimate that assumes a battery you haven't agreed to buy, or an electric car you don't own yet. Both raise the self-use share and make the figures look better. An honest estimate shows the system as quoted, with any extras shown separately so you can see what each one adds.
The same goes for future electricity prices. If an estimate assumes prices will rise by a set amount each year, ask to see the figures without that rise as well. The difference between the two shows how much of the case rests on a forecast rather than on the system itself, which is the part MCS warns against signing on.
Over time
After installation: checking the estimate
Once the system is running, keep a record of generation from the inverter display or app. After a full year, compare the total with the estimate's generation figure. Weather varies from year to year, so expect some difference, but a large and consistent shortfall is worth raising with the installer, with your readings attached. See when something goes wrong.
Sources for this page
- MCS — The MCS Customer Commitment, version 1.1 (8 September 2026) read 3 November 2026
- RECC — information for consumers read 3 November 2026
- RECC — consumer top tips read 3 November 2026
- Ofgem — SEG guidance for generators (PDF) read 2 November 2026
- ASA — "Greener homes: building on facts, not fibs" read 2 November 2026
Ready for a solar panel quote?
Tell us about the house and the roof, and what you would like priced: panels, a battery or both. If an installer has already quoted, add the system size and the price. Your details reach SEO-DONS LTD, which runs Solar Panel Installers, and we reply by email.
What happens next
- Your details go to SEO-DONS LTD, the company that runs Solar Panel Installers.
- We read what you have told us about the house and reply by email.
- Asking for a quote costs nothing and puts you under no obligation.